Ramiaudio CSS300 Manuel Utilisateur page 34

SNMP Trap Enable
Status AES audio input
Status SDI pll
 Configuration IP .
Choose an IP for CSS300. It should be under the same net as your router
Example1 :
If router IP is 192.168. .1 then CSS300 IP will be: 192.168. .xxx
(xxx between 2 and 254)
Example2 :
If router IP is 192.168. .1 then CSS300 IP will be: 192.168. .xxx
(xxx between 2 and 254)
Attention : Adress should be unique in the net.
Note: After IP modification,the equipment starts automatically.
RAMI
WEB INTERFACE - next -
Don't forget to save your config
Silence (1), Clip (2) or signal OK (3)
Lock (1) or nolock (2)
1
0
Checkbox to enable the sending of the SNMP trap.
1
0
34 CSS300