Front Panel - Ramiaudio CSS300 Manuel Utilisateur

FACTORY
IP
idéo
SDI silence detector
1 2
1 - USB socket to update firmware.
2 - Default IP config loading (IP: 192.168.0.40)
3 - Keys to select monitoring input with associated indicators.
4 - 1/4" headphone socket.
5 - Leds peakmeter (dBFs).
6 - SD card slot.
Prior first use do not forget to fix the SD card in the equipment. It is good practice to connect all equipments before
to switch on.
Remove the cover 6 on CSS300 front panel. As a CEM safety, removing the cover, cuts the SD card supply.

Push SD card in holder .

Replace the cover to restore the supply voltages of the card reader.

a / Features :
 Audio : 
Reads stereo MP3 (MPEG ½ layer 3), 44.1KHz from 112 Kbit/s to 320 Kbit/s.

Reads CBR files (Constant bit rate) and VBR (variable bit rate).

Reads stereo Wave 44.1KHz 16 bits.

 SD-card : 
Uses SD card 64 Mo mini FAT 16 or FAT 32.

Allows file long names.

Up to 999 files.

b / Way of use, file making on SD:
Audio files must be saved on SD card, according to:
Files are organised in two groups : files in a list or random. In both cases, files are used only on CSS300 alarm.

Each group correspond to one directory. Only one directory level is allowed on the SD root.

 Random files are saved in the 0R0 (zero R zero) directory.
Example :
It is possible to mix MP3 and WAVE. Files are used randomly and continuously.
RAMI

FRONT PANEL

5
MONITORING
L
R
-40 -30 -24 -18 -12 -9 -6 -3 O dBFs
AES 1 AES 2 AES 3
PHONES
3 4
24
6
Mains
OPTION POWER
7 8 9

On
10
CSS300