Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
D/ Network settings configuration
SNMP configuration
MIB II system group:
SysContact :
The contact person for this managed device.
SysName :
An administratively-assigned name for this device.
SysLocation :
Location of the unit.
RAMI
WEB INTERFACE - next -
user-defined settings in the standard SNMP header.
Download the CSS300 MIB file.
SNMP Access:
names if you want the SNMP agent to respond
to the NMS/SNMP with different read and
write community names. If less than three
communities are needed, leave extra fields
blank do disable them.
SNMP trap destination:
and B for sending SNMP traps.
Type:
specifies if the trap use V2c inform or V2c
format.
Number of Retries:
times to resend an inform request
Timeout(sec):
attendre une réponse avant de renvoyer.
Community:
SNMP traps.
IP adress:
destination IP address of SNMP traps.
Enable :
Enables transmission of SNMP traps to this
destination.
33
configure multiple community
define target destinations A
specifies a maximum number of
spécifie le nombre de secondes à
group community name for sending
CSS300
Publicité
Chapitres
Table des Matières
