Publicité
Les langues disponibles
Les langues disponibles
EN
DESCRIPTION
-
Your music is always available with the built-in player, which includes Bluetooth
and FM radio.
-
There is a setup menu with multiple settings for equipment operation, sound outputs and for each mode:
Maximum volume, instrument on volume, equalization, balance, repeat modes, speaker output groups,
etc.
-
You can set up the sound in two zones with the output of two selectable loudspeaker groups, A, B or
A+B.
-
Built-in player and multiple audio inputs make this amplifier highly versatile and adaptable to all needs.
CONTROLS AND FUNCTIONS
FRONT PANEL
1
1.- POWER: amplifier on/off switch.
2.- VOL/ : multi-function control:
-
VOLUME: Rotate the knob to change the overall volume of the amplifier outputs.
-
MENU: Long press the control to enter the menu for the selected mode. Rotate the wheel to
nscroll through the menu options and press to select the option displayed on the screen. For more
information, please refer to the MENU section
-
SPECIFIC FUNCTION FOR ACTIVE MODE (USB, FM and Bluetooth modes only):
In USB and Bluetooth mode: Short press and rotate the knob to change songs, after selecting the
song wait a few seconds and the display will return to the original state. If you make 2 short presses
on this control, playback pauses, press it again to resume playback.
In FM mode: Short press and rotate the knob to select another station stored in the memory; after
selecting the station wait a few seconds or press the control again and the display will return to its
1 2
3
4 5 6 7
original state.
3.- BASS: boosts or attenuates low frequencies.
4.- TREBLE: boosts or attenuates high frequencies.
5.- INPUT: the selector of the input source to be played on the amplifier outputs.
6.- MIC: unbalanced microphone input, 6.3 mm jack plug.
7.- PHONES: headphone output, 6.3 mm stereo jack
8.- USB port for audio file playback.
9.- Information display.
2
3
8
9
4
5
10
- 2 -
receiver, USB player
®
6
7
8
11
12
9
Publicité
