Install; How To Install; Step 1: Where To Install - SELFSAT -H21D Manuel Utilisateur

Install

How to Install?

By following the instructions step by step you can proceed easily to install SELFSAT-H21D by yourself
or with the help of a professional antenna installer.
Before installing your antenna, you check that SELFSAT-H21D box contains all the items listed above
in the 'Box Content'. In the event of any missing parts, please contact your distributor.

Step 1: Where to Install?

In order to receive a signal from the Satellite, SELFSAT-H21D is to be installed in an open loop space
(outside the house or the apartment), in the direction of the satellite towards the equator, for which,
you will need a compass to exactly orient SELFSAT-H21D toward the satellite (Note; please take
reference to the table of the Azimuth angles specified in the back pages of this manual)
which can decrease the signal reception quality, such as buildings, or trees (you may keep in mind
that trees will grow and may block the signal).
In order to be able to fix and install your antenna easily you might choose an easily accessible place
without any potential danger for installation.
Think about the way you might pass your cable in a discreet way from the SELFSAT-H21D to your Set
top Box. The antenna should not be too distant from your satellite receiver; a cable longer than 30
meters can decrease the quality of the signal.
Bad Quality Singnal Reception
7
Note
To ensure an accurate compass reading, stay away from large
metal objects, specifically electrical cables and then make
multiple readings
Make sure that there are no obstacles in front of SELFSAT-H21D
SELFSAT-H21D
BAD! BAD!