Canon PIXMA MP520 Guide De Démarrage Rapide page 36

5
Remove the orange protective cap (G) from
the bottom of the ink tank.
Carefully hold the protective cap when removing it
to prevent the ink from staining your fingers.
Discard the cap once it is removed.
Important
Do not touch the electrical contacts (H) on the ink tank.
Doing so can cause the machine to malfunction or
become unable to print.
6
Insert the front end of the ink tank into the
Print Head.
Make sure the position of the tank matches the
label (I).
7
Press on the
the ink tank snaps firmly into place.
Confirm that the ink lamp (J) lights up red.
8
Lift the Scanning Unit (Printer Cover) slightly to set the Scanning Unit Support back
to its original position, and then gently close the Scanning Unit (Printer Cover).
Note
If the error message is still displayed after the Scanning Unit (Printer Cover) is closed, refer to "An
Error Message Is Displayed on the LCD" in the User's Guide on-screen manual.
32 Replacing an Ink Tank
mark on the ink tank until
(G)
(J)
(H)
(I)