2. Install the cradle on top of the base and slide
down until it clicks and locks.
3. Place your phone on the cradle bottom support
and push it downward to open the cradle grips.
4. When the cradle grips open wide enough, lay
your phone onto the cradle back support.
5. Lift up your phone just a little bit to retract and
fully close the grips to hold your phone securely.
6. If you have a large size phone (6.5-inch or longer),
you may want to extend the cradle bottom support.
In order to do this, press the release button and pull
down the cradle bottom support to the desired
length.
7. To change the viewing angle, simply hold and
bend the flexible arm to accommodate your viewing
comfort.
8. To change between vertical and horizontal views,
just hold and turn the cradle with your phone.
2