Publicité
Les langues disponibles
Les langues disponibles
4) fitting the liner
a. FIt the liner and insert 2 half pegs in the recesses in the mouth.
b. Fill the pool with water.
c. The male section should be fitted into both recesses. To ensure this, before mounting the flange, cut the top
part of the liner between the 2 recesses. Push the male section into the recesses.
d. Mount the flange and its seal.
e. Cut the liner inside the skimmer mouth.
5) finish
a. insert the LinerLock tapping gently with a hammer around the entire periphery of the pool. The LinerLock must
be used to ensure perfect leaktightness at the point where the liner is fitted into the locking track.
Hung cut out
15/16
Liner cut out
2011/01 - Indice de révision : A - Code : 0025110
Publicité
