D-Link ShareCenter DNS-345 Guide D'installation Rapide page 4

Using a Router or Switch:
If you are connecting your ShareCenter to a router or switch, your router
or switch needs to support Gigabit Ethernet (1000Mbit/s) for maximum
performance. The ShareCenter will auto-negotiate the highest connection
speed available to your router or switch.
Using an Uninterrupted Power Supply (UPS)
We highly recommend to plug your ShareCenter into an uninterrupted
power supply (UPS), which protects against sudden losses in power as well
as power surges.
Setting Up in Just a Few Easy Steps
Once you have unpacked your ShareCenter from its box and ensured
you meet all system and hardware requirements, it's time to set up your
ShareCenter for use. This can be done in just a few easy steps:
1. Insert the hard drives.
2. Connect the power and Ethernet cables to your ShareCenter.
3. Power on the device.
4. Run the D-Link ShareCenter® Setup Wizard to configure the DNS-345.
5. Configure the hard drive(s).
D-Link DNS-345 Quick Install Guide
4