Axis Q3517-LVE Guide D'installation page 16

AXIS Q3517–LVE Network Camera
8. Attach the unit casing to the mounting bracket by tightening the four tamper-proof
screws with a Resistorx® key TR20.
9. Connect the network cable to the camera unit.
10. Pull the springs aside in the unit casing and attach the camera unit to the unit casing.
Adjust the camera angle
1. Pan and tilt the camera to adjust the angle. The camera can pan 360° and tilt from
-80° to 80°.
2. Rotate the camera to adjust the angle. The camera can rotate ±175°.
16