Kimex 013-4086 Manuel D'installation page 15

Secure the TV brackets on the mount by attaching the 4 x AA Safety Brackets with 4 x F
Screws as shown on the image.
NOTE: Failure to secure the TV brackets to the mount with AA Safety Brackets may
result in accidental lift off of the TV from the extension bars, possibly resulting in
bodily or property damage.
6.
Leveling adjustment -5° - +5°
The mount allows up to 5 degrees of leveling adjustment post installation. To adjust the level of the
TV, place a bubble level on top of the TV, loosen the 2 x G bolts located behind the VESA plate, level
the TV and tighten the 2 x G bolts to lock the TV in position.
Tilt adjustment -5° - +10°
7.
The mount can tilt up up to 10 degrees and down 5 degrees. To adjust the tilt angle of the TV, pull
out the tilt adjustment levers on both sides of the mount and turn counterclockwise to loosen the
screws. Adjust the tilt to the desired angle and turn the tilt adjustment lever clockwise to tighten the
screws. NOTE: IF THE TV TILTS DOWN AFTER A PERIOD OF USE, CHECK THE TILT
ADJUSTMENT LEVER TIGHTNESS AND TIGHTEN IF NECESSARY.
G
7