Publicité
Les langues disponibles
Les langues disponibles
CAUTION: USER MUST VERIFY THE WALL CAN HOLD THE WEIGHT
OF THE TV AND THE TV MOUNT.
1a.
INSTALLATION OPTION 1: Wood Stud Installation
1). Use a stud finder to locate the dry wall studs and mark the desired installation locations
with a pencil.
2). Attach the Wall Plate Template (BB) to the wall at the desired installation location.
3). Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level and
mark 6 lag bolt installation locations on the stencil and the wall. Attempt to locate the lag bolt
locations on the middle of the studs.
4). Use a 7/32" (5.5mm) drill bit to drill a pilot hole on the wall with a depth of at least 2.6" (65mm).
Please note, failure to drill pilot holes may result in the lag bolt heads snapping during installation.
Secure the Wall Plate to the wall with 6 x Lag Bolts ( H) and 6 x Washers
(H). NOTE: Do not use Wall Anchor (I) for wood stud installation.
Concre te
wall
3
16" - 24"
8
"
m)
Wood stud
wall
(41 cm- 61c
Bit
Masonry
Hammer
Requir ed
Tools
7
32
"
2.56 " (65
mm)
Wood Bit
3/8"
(10 mm)
Stud Finder
TEMPLA
TE
Drill
Level
Pencil
2.56 " (65
mm)
7/32 "
HOLE S
DRILL ING
(5.5 mm)
BEFO RE
to
Tape over
each hole
nt of dust
the amou
minim ize
TE
TEMPLA
(Suitable for 16" or 24" apart studs)
65mm
(2.6")
5.5mm
7/32"
13mm
Publicité
