CYKLOP CMT 50 Mode D'emploi Et De Sécurité page 20

CYKLOP CMT 50
– Insert the strap from coil holder between the tension
wheel (7/3) and the tension shoe (7/2). Then insert
the strap into the slot of the cutting device (7/1) until
stop is reached.
– Hold the tool by the grip with the left hand and
move the tension lever with the right hand back-
and forward until the desired strap tension is rea-
ched.
The maximal strap tension is adjustable
(see chapter 7.3).
If the tool is used in a dusty environement, it is rec-
ommended to clean the tool regularly. The tension
wheel in particular should be kept clean (see chap-
ter 7.5).
20
2
3
Fig. 7
Fig. 8
1
02.08