Operating Instructions; Operating The Tool - CYKLOP CMT 50 Mode D'emploi Et De Sécurité

6
1
Fig. 5
2
Fig. 6
02.08

OPERATING INSTRUCTIONS

– Insert charged battery and close the bow spring
(5/1).
– Place the strap around the package and hold it with
the left hand so that the lower strap lead is approx.
20 cm (8") away from the hand.
– Take the tool with the right hand and press the lever
towards the handle.
– Slide the strap lead under the tension shoe (6/2)
and under the cutting device (6/1) into the tool until
the stop is reached.
– Release the lever.
1

6.1 OPERATING THE TOOL

The lower strap is now approx. 5 cm (2")
beyond the tool.
CYKLOP CMT 50
19