Pinnacle International MASTER PRO MHP-135-KFA Manuel De L'utilisateur Et Instructions D'utilisation page 5

Models: MHP-135-KFA / MHP-190-KFA / MHP-215-KFA
- Remove the heater and all packaging
materials from the shipping carton.
Tip: Be sure to remove the axle from the
side of the Styrofoam packaging.
50 mm Screws (8)
Y-Bracket (2)
Front Handle
© 2013, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
Assembly Instructions
Axle Nuts (2)
Wheel Support Frame
Tools Needed:
- Phillips Head Screw Driver
- 8 mm open end wrench
- 19 mm open end wrench
Tip: Use a power screwdriver and
locking wrench for easier assembly.
8 mm Nuts (12)
Spacers (2)
Rear Handle
Kerosene Forced Air Heater User's Manual
4
Tires (2)
Spare Drain Plug (1)
Cord Wraps
Axle