T-Fal RK202EUS Manuel page 19

TFALU69-3in1_NC00027918_Mise en page 1 15/05/12 07:12 Page17
Technical troubleshooting guide
Malfunction description
The indicator lights are not
illuminated and appliance
is not heating.
The indicator lights are not
illuminated and appliance
is heating.
Cooking indicator light is
not illuminated, keep warm
indicator light is
illuminated.
Steam leakage during
using.
Rice not fully cooked or over
cooker.
Rice not fully cooked.
Automatic Keep Warm
function fails(appliance
stays on cooking program
or does not heat on Keep
Warm)
Water leakage on the work
surface.
Remark: if inner bowl is damaged, do not use it anymore. Obtain a replacement from the
Authorized Service Center for repair.
17
Causes
Rice cooker not plugged in.
A ploblem with the internal
connection of the indicator
light or the indicator light is
damaged.
Control switch not in the
cooking position.
Lid is badly closed.
Micropressure valve not
well positioned or
assembled incorrectly.
Lid or micropressure valve
gasket is damaged.
Not enough or too much
water compared to rice
quantity.
Mode is in the slow cooking
setting.
Condensation collector
missing or condensation
collector overflow.
Solution
Check the power cord is
firmly engaged in the rice
cooker and the appliance is
plugged into the outlet.
Send to Authorized Service
Center for repair.
Push the control switch into
the lower position.
Open and close the lid
again.
Stop the cooking (unplug
the product) and check the
valve is assembled correctly
(2 parts locked together)
and well positioned.
Send to Authorized Service
Center for repair.
Refer to cooking chart for
water quantity.
Slide the switch to the
"rice/steam" mode.
Send to Authorized Service
Center for repair.
Empty the condensation
collector after each use and
check it is correctly
positioned.