Levoit LV-PUR131 Mode D'emploi page 9

3
unwrap
and place
3. Unwrap the new air
filters. Place the Activated
Carbon filter inside the
housing first, making sure
the pull tabs are facing the
opening.
5
5. Replace the back cover
onto the housing.
NOTE:
• The filters cannot be cleaned manually. If necessary, purchase new
filters for the unit on Amazon.com.
• The back cover must be placed back on the unit in order for it to
power on.
4
tab
facing out
4. Install the True HEPA filter
into the housing; make
sure the pull tabs are
facing the opening.
6
press black
button in vent
6. Press the button inside
the reset button vent (see
Resetting the Air Filter
Lifetime).
Resetting the Air Filter Lifetime
1. Plug in the air purifier and turn it on. Locate the reset button
vent on the side of the air purifier.
2. Using a pen, a pencil, or a small object, press and hold the
black reset button inside the vent for 3 seconds.
3. The "Change Filter" icon will turn off, indicating that the reset
is complete.
Cleaning The Dust Sensor
1. Turn off and unplug the air purifier.
2. Open the dust sensor cover.
3. Use a cotton swab, dipped in clean water, to clean the lens.
4. Wipe the lens dry with a dry, clean cotton swab.
EN
9