Operation - Levoit LV-PUR131 Mode D'emploi

Carbon
Filter
2nd
3rd
2. Replace the back cover by aligning the bottom portion of the
of cover with the inlets on the bottom of the housing. Slowly
close the cover by aligning the top portion of the back cover
with the inlets at the top of the opening.
3. Plug the unit into an electrical outlet. The unit will chime
indicating that it is connected to a power source.
4. Press the Power button to turn on the air purifier; the fan will
automatically default to Low Speed.
HEPA
Filter
1st
O P E R AT I O N
Button Controls
On/Off button.
Press the Display button to turn off the display
while the air purifier is operating.
NOTE: While the display is off, you can press any button
(except for the Power button) to turn on the display.
The Sleep Mode button sets the air purifier to
the lowest setting possible to create a quiet
environment while producing clean air. Press the
Sleep Mode button to activate this function. You
can press the Sleep Mode button, Speed button,
or Auto button, to exit out of Sleep mode.
NOTE: Sleep Mode is the lowest fan speed.
Press the Auto button to activate and deactivate
the air purifier's automatic sensor mode. The
automatic sensor adjusts the air purifier's fan
speed according to the current air quality to
provide clean air for your living space. The air
quality indicator will also illuminate on the LED
display; the table below shows the different colors
of the air quality indicator in correlation to both air
quality & fan speed.
Color
Red
Yellow
Green
Blue
Air Quality Fan Speed
Bad High
Moderate Medium
Good Low
Very Good Sleep Mode
EN
7