Kurzanleitung - nedis WIFIFNH20CWT Mode D'emploi

Temperature
w
1. Press B to set the temperature.
4 The temperature will show at B
4
The temperature can be set between 15 to 35
- Do not shut down the heater by turning off the main power
5
switch A or unplugging the power cord. This will prevent the
heater from cooling down properly and will reduce the lifetime
of the heater.
4
Overheat protection: The heater switches off automatically in
case of overheating, e.g. due to the total or partial obstruction
of the air inlet or the air outlet grid.
4 In this case, unplug the appliance, wait about 30 minutes for
cooling down and remove the obstructing object.
After this period the heater will operate normally.
4 If the problem persists, switch off the heater and contact the
Nedis B.V. service desk via the website: www.nedis.com.
4
Topple protection: The heater is fitted with a topple switch. This
switch is a safety precaution and will turn off the heater in case
it has fallen over.
4
Do not use the heater on thick and high pile carpets or bedding.
The topple switch may not be activated on this surface, as a
result of which the heater will not switch on.
Use the Nedis SmartLife app
You can control the product with your phone and the Nedis
SmartLife app.
1. Download the Nedis SmartLife app for Android or iOS on your
phone via Google Play or the Apple App Store.
2. Create an account with your mobile phone number or your
e-mail address.
3. Switch on the heater.
4. Tap + in the Nedis SmartLife app.
5. Select the device type you want to add from the list.
6. Confirm the indicator LED B
9
Power button B for 5 seconds to reset the heater.
7. Follow the instructions in the Nedis SmartLife app.
4
Make sure you connect the heater to a 2.4 GHz Wi-Fi network.
8. After adding the product, you can rename it and assign it to a
room. After confirming you can control the heater with your
smart phone.
4
For more information about how the app works, consult the
extended manual online.
4
To connect your SmartLife account to Amazon Alexa and/or
Google Home, set it up using the "Smart Life" action or skill. For
more details check the instruction on either Amazon or Google.
Specifications
Product
Article number
Dimensions (l x w x h)
Weight
5
C
o
6
is blinking fast, or hold the
Wifi Smart Fan Heater
WIFIFNH20CWT
600 x 425 x 320 mm
2.0 kg
Input voltage
Required power
Power settings
Adjustable temperature range 15 - 35 °C
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product
WIFIFNH20CWT from our brand Nedis
been tested according to all relevant CE standards and regulations
and that all tests have been passed successfully. This includes, but is
not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet
if applicable) can be found and downloaded via webshop.nedis.
com/WIFIFNH20CWT#support
For additional information regarding the compliance, contact the
customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands
c

Kurzanleitung

Elektrischer Heizlüfter WIFIFNH20CWT
Für weitere Informationen beachten
Sie die erweiterte Anleitung online:
ned.is/wififnh20cwt
Bestimmungsgemäße Verwendung
Nedis WIFIFNH20CWT ist ein elektrischer Heizlüfter zum Beheizen
von Räumen.
Jegliche Modifikation des Produkts kann Folgen für die Sicherheit,
Garantie und ordnungsgemäße Funktionalität haben.
Hauptbestandteile (Abbildung A)
1
Bedienfeld
2
Luftauslass
3
Griff
Sicherheitshinweise
WARNUNG
-
•
Verwenden Sie das Produkt nur wie in dieser Anleitung
beschrieben.
•
Jede andere Verwendung kann einen Brand, Stromschlag und/
oder Personenschäden verursachen und zum Erlöschen der
Garantie führen.
•
Die Verwendung von nicht empfohlenen Anbau- oder
Zubehörteilen kann Personen- oder Sachschäden verursachen.
5
AC 220 - 240 V ~ 50 Hz
1800 W
900 - 1800 W
, produced in China, has
®
4
Lufteinlassgitter
5
Ein/Aus-Schalter
6
Stecker