Bushnell IMAGE VIEW 111545 Mode D'emploi page 15

the capture and setup Menu-options and settings
As mentioned earlier in this manual, your ImageView spotting scope is already set for high resolution and
quality right out of the box. Exposure, white balance, and other variables are set automatically. This means
that you will get good results for most subjects and lighting without the need to go into the menu to change
any settings. However, we recommend that you become familiar with the available options so that you can
improve your photos if, for example, you decide they are coming out too dark (common for snow scenes with
most cameras), or too green (under some fluorescent lights). Press the MoDe button to enter the Capture
menu. Use the Up/Down arrow keys to highlight an option within the menu, then press ok if you wish to
change the settings for that option. Use the Up/Down keys to select the setting you want, then press ok
to confirm this setting. Here are all the options and settings available in the "Capture" menu, along with
descriptions of what they do:
oPtion SettingS
8M*, 5M, 3M, 2M, 1.3M, VGA
Size
(Resolution)
*8MP via software interpolation.
Actual sensor resolution is 5MP.
CaPture and setuP Menu-oPtions and settinGs
DeSCriPtion
Sets the desired still photo resolution in Megapixels. Higher
resolution settings produce sharper/larger prints but
require more storage space in internal or card memory. Use
lower settings to store more in memory, or for email, PC
viewing only, etc.
Note: Default settings are indicated in bold
15