Power Supply - Velleman VRC1001 Notice D'emploi

Refer to the following table set up each unit:
Bank
TV TV / CTV / TXT
VCR
SAT/CBL Satellite / Cable
CD / LD / DVD /
AUX VCD / AMP /
4. Switching to a Different Device
When you press the device key (TVTXT1, TVTXT2, VCR1, VCR2, SAT/CBL, CBL/SAT or HIFI/CD/LD) for the
second time in order to confirm the code, the VRC1001 will leave the setting mode for the code of the first device.
Select the second device you wish to operate. In other words, press TVTXT1, TVTXT2, VCR1, VCR2, SAT/CAB,
CAB/SAT or HIFI/CD/LD. Use the procedure explained under "Setting up the Unit" or "The "Quick Search"
Function" to set the codes for the other devices: TVTXT1, TVTXT2, VCR1, VCR2, SAT/CAB, CAB/SAT,
HIFI/CD/LD.
This means that you should always use the following procedure: press SET, press a device key, press SET again
and press POWER repeatedly until the selected device reacts to the signal from the VRC801. Press the device key
again to confirm the code for the device.
5. Reading Out the Code
Hold SET and press
Hold SET and press
Hold SET and press
Factory Settings for the Device Codes:
Device
TVTXT1
TVTXT2
VCR1
VCR2
SAT/CBL
CBL/SAT
HIH/CD/LD

6. Power Supply

Insert 2 x 1.5V AAA type batteries.
VRC1001
Device Codes
304
VCR 111
237
176
HIFI
. The first digit is indicated by the number of times the LED flashes.
. The second digit is indicated by the number of times the LED flashes.
. The third digit is indicated by the number of times the LED flashes.
Brand Code
000-268
700-734
269-370
750-758
371-523
800-883
524-699
Factory Setting
027
075
278
284
424
521
552
- 4 -
Setting Quick Search
000-699
700-734 000-268
750-758 700-734
800-883
000-699
700-734 269-370
750-758 750-758
800-883
000-699
700-734 371-523
750-758 800-883
800-883
000-699
700-734
524-699
750-758
800-883
Brand
Philips RC5 (TV)
Telefunken (TV)
Philips RC5 (VCR)
Grundig (VCR)
Philips RC5 (SAT)
GMI-909 (CBL)
Philips RC5 (CD)
VELLEMAN