Eaton Powerware 5125 Guide D'installation page 14

Installation
NOTE If there are two UPSs in a rack, up to two EBMs may be connected to each
UPS.
Multi-Server Module Port 1
UPS Battery
Connector
EBM Battery
Connectors
5. Insert the supplied cord retention clips by each output
8
Ground Bonding
Screw
Figure 4. Typical Installation with Two EBMs
receptacle that will be used (see Figure 5).
Figure 5. Attaching the Cord Retention Clips
Powerware 5125 Installation Guide for IBM Applications
®
Output Receptacles
Power Cord
:
164201356 B Uncontrolled Copy
Circuit
Breakers
EBM
Cable