Saeco SUP 021 Mode D'emploi page 33

The user can change some machine operating parameters to suit his/her personal needs.
Procedure for accessing
machine programming
mode.
The hardness of tap water may vary depending on the region. For this reason, the appliance
can be set according to the water hardness in the place where it is to be used, expressed
on a scale of 1 to 4.
The appliance is factory set on a hardness value of 3*. The setting should be adjusted
according to the level of water hardness in the local area.

Hardness 4
Hardness 3
Hardness 2
Hardness 1
Check how many squares
change colour.
PROGRAMMING MACHINE FUNCTIONS
1
Turn the machine off.

Press the button to program
the water hardness.

and
Press the buttons together. Keeping the buttons pressed down,
turn on the machine.

Set the machine according to these indications.
The degree of hardness will be signalled by the indicator
lights.
1

1
Dip the strip in water for 1
second.
Hardness 4
Hardness 3*
Hardness 2
Hardness 1