Saeco SUP 021 Mode D'emploi page 24

6
INSTALLATION / CIRCUIT LOAdING
The messages displayed by the machine during operation are shown on pg.17.
1
Check that all components
are correctly placed.

Move the ON/OFF switch
to "I" to turn on the ma-
chine.
9
Wait until a steady stream
of water fl ows out from the
nozzle.
note: You must load the circuit before starting up the
machine for the fi rst time, if it has been inoperative for
a lengthy period or if the water tank has been complete-
ly emptied. The circuit must also be loaded each time
the light fl ashes:
Adjust water hardness as shown on page 15.

Fill the coffee bean container
with coffee beans.
6
The machine is warming up;
lights are fl ashing.
10
Turn the knob clockwise to
terminate the circuit-loading
process.

Fill the tank with fresh drin-
king water.

Place a container under the
steam tube.
11
Remove the container.

See rating plate
Insert the plug into a sui-
table electric socket.
8
Turn the knob countercloc-
kwise to start loading the
circuit.
1
When lights remain stead-
ily lit, the machine is ready
for use.