Bosch ErgoMixx Style MSM6 Serie Manuel D'utilisation page 12

en Avoiding material damage
▶ Do not use the appliance with damp hands.
▶ Never operate a damaged appliance.
▶ Never let the power cord come into contact with hot parts or be
dragged over sharp edges.
▶ Never place the appliance on or near hot surfaces.
▶ After switching off, wait until the drive has come to a complete
standstill.
▶ Keep hands, hair, clothing and utensils away from rotating parts.
▶ Never touch the edges of the blades with bare hands.
▶ Care should be taken when handling sharp blades, emptying the
container and during cleaning.
▶ Be careful when processing hot food.
▶ Leave boiling food to cool down to at least 70 °C before pro-
cessing.
▶ Follow the cleaning instructions.
▶ Clean surfaces which come in contact with food before each
use.
Avoiding material damage
▶ Do not operate the appliance at no-load.
▶ Never use the blender jug in the mi-
crowave or oven.
▶ Place the base unit fully on the blender
foot or accessory and lock into position
with a click.
Overview
→ Fig.
1
Speed setting
1
On button
2
Turbo button
3
Release buttons
4
Blender foot
5
1
Lid
6
Plastic blender jug
7
1 2
Whisk
8
Universal cutter L
9
1
Depending on the model
2
separate operating instructions
12
1
1 2
Universal cutter XL
10
"ProPuree" masher attachment
11
1
Depending on the model
2
separate operating instructions
Note: If an accessory is not included in the
scope of supply, it can be ordered from
customer service.
Controls
Speed setting
For continuous speed adjustment. Set the
rotary selector between ● (lowest speed)
and 12 (highest speed).
On button
To use the appliance at the preselected
speed.
Turbo button
To use the appliance at maximum speed.
Note: The appliance remains switched on
as long as one of the buttons is pressed.
1 2
Printed on 100% recycled paper
1 2