KMC 6940 User Manual
Risk of Damage to Material and Property
• Always check the device for damage before putting it into operation. The device
should only be used when it is fully assembled, undamaged, and in working order!
• Always place the device on a dry, even, firm and heat-resistant surface. Do not place it
below kitchen wall units or similar cupboards. The rising steam could cause damage
to them!
• Do not place the device on or next to heat sources such as hobs or ovens. Keep naked
flames, e.g. burning candles, away from the device, the cable and the plug.
• The device may not be heated up when it is empty. Do not allow the motor to run
when the device is empty.
•Make sure that the maximum fill level (MAX marking in the mixing bowl) is not
exceeded!
• Make sure that the mains cable is not squashed, bent or laid over sharp edges and
does not come into contact with hot surfaces (this also applies to the hot surfaces of
the device!).
• Do not move the device during use.
• When the mains plug is removed from the plug socket, always pull on the mains plug
and never the cable.
• Do not pull or carry the device by the mains cable.
• Use only original spare parts from the manufacturer.
• Never place heavy objects on the device.
• Do not expose the device to extreme temperatures, strong temperature fluctuations,
moisture, direct sunlight or impacts.
Items Supplied and Device Overview
Unpack all parts and check the items supplied for completeness and any transport
damage. If you find any damage to the components, do not (!) use the device, but
contact our customer service department.
31