Topcom HB 10M00 Manuel D'utilisateur page 55

TOPCOM HB 10M00
4. Reboot your PC after installa-
tion and plug-in the USB don-
gle into a free USB port.
5. After rebooting, Windows will
install the proper USB device for the USB dongle.
11.2 PAIRING THE WATCH, CHEST AND GPS POD WITH
THE DONGLE
Note:
• The watch MUST be switched to 'PC-Link' display of the logbook mode,
and activate the PC-link function. (See "8.2.11 Logbook functions menu"
under "Menu 3: PC link".)
• The chest strap MUST be worn on the chest or press the two contacts.
• The GPS pod must be turned on.
1. When the installation is completed. Execute the 'Wireless Data Man-
ager' program from the Windows program menu bar.
2. The wizard will guide you to pair the watch, chest strap and GPS pod
with the program.
3. When the pairing is done the ID of the watch, chest strap and GPS will
be saved into the program.
For some instance, the watch and the chest strap can be paired
with the program again under the 'Option' top menu and the
'Setting' option.
PC
USB dongle
PC
USB dongle
55