Topcom HB 10M00 Manuel D'utilisateur page 5

TOPCOM HB 10M00
6 BUTTONS
[ESC]
[EL]
[M]
6.1 MASTER RESET
Press and hold [M], [ ] and [ ] simultaneously to reset the watch.
All set information will be lost, also the time!
6.2 BACK LIGHT
Press the [EL] key to active the back light of the display for 3 seconds.
Mode Button [M] (MODE/SET)
• To select the current function or menu.
• Hold down to select setting mode. In
setting mode: To select among the setting
items.
Escape Button [ESC] (LIGHT/ESC)
• To select between timekeeping and sensor
mode.
• To exit from setting mode.
• To go back to previous screen or function
[ ]
level.
Up Button [ ] (ST./STP.)
• To scroll the menu upward.
• To activate the 'start' or 'stop' function
under chronograph, timer, pacer mode.
[ ]
• To increase the setting value during
setting.
Down Button [ ] (LAP/RESET)
• To scroll the menu downward.
• To activate the lap function during
chronograph mode and reset function
during chronograph (hold down), timer
and pacer (hold down) mode.
• To decrease the setting value during
setting.
Light button [EL]
• To turn on the backlight for a few seconds.
5