Nolangroup N-Com MCS III R Serie Mode D'emploi page 9

Fig. 4
Fig. 5
 Fix the cable inside the helmet and make sure the left fixing clip snaps into its housing.
N.B.: For positioning of the wiring and of the
microphone in the N100-5 helmet, follow the
instructions provided in the dedicated box.
Fix the cable inside the helmet and make

sure the right fixing clip snaps into its
housing (Fig. 4).
 Position the microphone in the housing on
the right of the helmet, inserting the metal
boom in the groove found in the chin guard
coupling frame (Fig. 5).
Caution: make sure that the side of the
microphone support with the writing "N-
Com" is facing inward.
MCS III
9