Nolangroup N-Com MCS III R Serie Mode D'emploi page 12

EN
3.2. Adjusting the microphone
The MCS III system makes it possible to adjust the position of the microphone in order to facilitate its
positioning in the different helmet models. Proceed as follows:
 Open the clip positioned on the microphone boom, operating as indicated in Fig. 15.
 Adjust the microphone (Fig. 16).
 Close the clip (Fig. 17).
Fig. 15 Fig. 16 Fig. 17
To ensure good voice transmission quality, it is recommended to position the microphone sponge at
the side of your mouth.
12