this operating ManUal contains
iMportant safety inforMation.
read carefUlly and Understand
all inforMation Before operating
this deVice. saVe this ManUal for
fUtUre Use.
owner/User responsiBility
The owner and/or user must have an understanding of
the man u fac tur er's operating in struc tions and warn ings
be fore using this service jack. Personnel involved in
the use and op er a tion of equip ment shall be careful,
com pe tent, trained, and qual i fied in the safe operation
of the equip ment and its proper use when servicing
motor vehicles and their com po nents. Warning
in for ma tion should be em pha sized and un der stood. If
the operator is not fluent in English, the man u fac tur er's
in struc tions and warn ings shall be read to and dis cussed
with the op er a tor in the op er a tor's native language
by the pur chas er/own er, mak ing sure the op er a tor
com pre hends its con tents.
Owner and/or user must study and maintain for future
ref er ence the manufacturer's instructions. Owner and/or
user is responsible for keeping all warning labels and
instruction manuals legible and intact. Replacement
labels and literature are available from the
manufacturer.
SPECIFICATIONS
Required Air Pressure .................................... 100 psi
Low Height .................................................... 6-1/4"
Raised Height ..................................................... 22"
Length ......................................................... 60-5/8"
Chassis Width ............................................... 7-5/8"
Chassis Width with Swivel Caster Bracket ...... 18-3/8"
Handle Length ............................................. 45-3/4"
Saddle Diameter ............................................ 5-7/8"
Shipping Weight .......................................... 319 Lbs
791-6620 B
• Read, study, undeRstand and follow all instRuctions
befoRe opeRating this device. • inspect the jack befoRe
each use. do not use jack if damaged, alteRed, modified,
in pooR condition, leaking hydRaulic fluid, oR
unstable due to loose oR missing haRdwaRe oR paRts.
make coRRections befoRe using. • lift only on aReas of
the vehicle as specified by the vehicle manufactuReR.
• weaR eye pRotection that meets ansi Z87.1 and
osha standaRds. • do not use jack beyond its Rated
capacity. • this is a lifting device only. immediately
afteR lifting, suppoRt the vehicle with jack stands
capable of sustaining the load befoRe woRking on the
vehicle. • use only on a haRd level suRface fRee fRom
obstRuctions so the jack is fRee to Reposition itself
duRing lifting and loweRing opeRations. • centeR
load on saddle. be suRe setup is stable befoRe woRking
on vehicle. • do not move oR dolly the vehicle while
on the jack. • do not use saddle adapteRs oR saddle
extendeRs between the stock lifting saddle and the
load. • do not use any adapteRs unless appRoved oR
supplied by napa. • always loweR the jack slowly and
caRefully. • failuRe to heed these maRkings may Result
in seRious oR fatal peRsonal injuRy and/oR pRopeRty
damage.
1
Model # 791-6620 B
10 Ton CapaCiTy
professional
air/HydrauliC
serviCe JaCk
WARNING
Revised 04/15/09