Napa 791-6402 A Mode D'emploi

BEFORE USING THIS DEVICE, READ THIS
MANUAL COMPLETELY AND THOROUGHLY,
UNDERSTAND ITS OPERATING
PROCEDURES, SAFETY WARNINGS AND
MAINTENANCE REQUIREMENTS.
It is the responsibility of the device owner to make sure all personnel
read this manual prior to using the device. It is also the responsibility
of the device owner to keep this manual intact and in a convenient
location for all to see and read. If the manual or product labels are lost
or not legible, contact NAPA for replacements. If the operator is not
fluent in English, the product and safety instructions shall be read to
and discussed with the operator in the operator's native language by
the purchaser/owner or his designee, making sure that the operator
comprehends its contents.
SPECIFICATIONS
Capacity .................................................................................2 Tons
Low Height ..............................................................................
High Height ..........................................................................
Handle Length .............................................................................50"
Overall Length .....................................................................
Overall Width .......................................................................
Saddle Diameter .....................................................................
Shipping Weight ................................................................... 75 Lbs.
791-6402 A
Low ProfILe ServICe jACk
• Read, study, understand and follow all instructions before
operating this device. • Inspect the jack before each use.
Do not use jack if damaged, altered, modified, in poor
condition, leaking hydraulic fluid, or unstable due to loose
or missing components. Make corrections before using.
• Lift only on areas of the vehicle as specified by the vehicle
manufacturer. • Wear eye protection that meets ANSI Z87.1
and OSHA standards. • Do not use jack beyond its rated
capacity. • This is a lifting device only. Immediately after
lifting, support the vehicle with jack stands capable of
sustaining the load before working on the vehicle. • Use
only on a hard level surface free from obstructions so the
jack is free to reposition itself during lifting and lowering
operations. • Center load on saddle. Be sure setup is
stable before working on vehicle. • Do not move or dolly
the vehicle while on the jack. • Do not use saddle adapters
or saddle extenders between the stock lifting saddle and
the load. • Do not use any adapters unless approved or
2-7/8"
supplied by NAPA. • Always lower the jack slowly and
19-5/8"
carefully. • This product contains chemicals known to
the State of California to cause cancer and birth defects
28-7/8"
or other reproductive harm. Wash hands thoroughly after
13-1/2"
handling. • Failure to heed these warnings may result in
4-3/4"
serious or fatal personal injury and/or property damage.
1
Model # 791-6402 A
2 Ton CAPACITY
WARNING
11/21/11