ARIETE 908 Mode D'emploi page 10

E N
35. Packaging must never be left within the reach of children since it is potentially
dangerous.
36. To dispose of product correctly according to European Directive 2012/19/
EU, please refer to and read the provided leaflet enclosed with the product.
DO NOT THROW AWAY THESE INSTRUCTIONS
APPLIANCE DESCRIPTION (Fig. 1)
A Handle
B Cooking plates
C Power on and timer dial
D Temperature light
E On light
F Temperature adjusting dial
G Operating switch of the lower plate (I) or both plates (II).
HOW TO OPERATE
WARNING:
Before use, check the baking plate is clean and free of dust streaks. If need be, clean using
a damp cloth.
While using for the first time, a very small amount of smoke may come out; this is just caused
by the warming up of some components.
- Plug in appliance and switch the appliance on by rotating the power on and timer dial (C). The
related power indicator (E) and the light (D) turn on, signaling the pre-heating phase.
Set the required cooking time or the one indicated by the table of the following paragraph.
- Set the highest temperature level using the dial (F):
Should the appliance be used for warm food up only, an intermediate temperature may be set.
After few minutes, the temperature light (D) turns off and the appliance is ready for use.
- Raise then the upper part of the appliance with the handle (A) and place the pizza or any other
food to be prepared on the cooking plate (B).
- The switch (G) can activate both plates (II) or just the lower one (I).
- Close appliance upper part.
- After each use, disconnect the plug from the mains outlet by rotating both dials (C, F) to "0".
- 8 -