Husqvarna WS220 Manuel D'utilisation page 18

• Aim the blade guard runners on to the guide tracks
towards the guide flange and push the blade guard
over the blade.
• Fit the blade guard bracket onto the saw unit
attachment and screw the locking wheel shut.
• Make sure that the blade is centered in the blade
guard and that the blade is free.
18 – English
ASSEMBLING AND ADJUSTMENTS
• If the outer sections have been removed during
assembly, they may now be mounted by hooking the
fork in the lower edge of the middle section and folding
the outer section towards the middle section, and then
locking with the locking wheels.
• Connect the water hose between the outgoing water
supply connection on the saw body to the water
connection on the guide flange.