Specifications - Haussmann Xpert PNT138-R Manuel De L'utilisateur

IMPORTANT SAFETY INSTRUCTIONS
Use only a pressure-regulated compressed air source to limit the air pressure

supplied to the tool. The regulated pressure must not exceed 110 PSI. If the
regulator fails, the pressure delivered to the tool must not exceed 120 PSI. The
tool could explode which will cause death or serious personal injury.
Always disconnect air resource:

a) Before making adjustments.
b) When servicing the tool.
c) When clearing a jam.
d) When tool is not in use.
e) When moving to a different work area, as accidental actuation may occur,
causing injury.
Never connect tool to an air source that may exceed 180 PSI. Over

pressurizing the tool may result in bursting, abnormal operation, breakage of the
tool or serious injury to persons. Use only clean, dry, regulated compressed air
at the rated pressure or within the rated pressure range as marked on the tool.
Always verify prior to using the tool that the air source has been adjusted to the
rated air pressure or within the rated air-pressure range.

SPECIFICATIONS

The HAUSSMANN XPERT nailer shoots most standard air staples as well as 18
gauge brad nails. It can be used for cabinet making and furniture assembly, door
and window casing manufacturing, aluminum and vinyl siding installation, soffit
work, trim and moulding application, picture framing and applications where
gluing is necessary, but clamping is impractical.
Shoots all sizes of industry standard 18 gauge narrow crown staples (1/4"

crown), 5/8'' to 1-5/8'' (16 to 40 mm) in length.
Shoots industry standard 18 gauge brad nails in the following sizes: 5/8" (16 mm)

3/4" (20 mm), 1" (25 mm), 1-3/16" (30 mm), 1-1/4" (32 mm), 1-5/8"(40 mm),
1-3/4" (45 mm) and 2" (50 mm).
Operating pressure: 70-110 PSI

Air consumption: 4-5 CFM @ 90 PSI

Air inlet: 1/4" NPT

Rubber grip

ACCESSORIES
2 hex keys

Small bottle of air tool oil

Safety goggles

19