Grundig TA 7280 Manuel D'utilisation page 19

OPERATION­______________________________
The browing degree of one slice is darker than
7
two slices, although the browning control
set to the same level.
4­­
P ress the start lever
snaps into place.
– The toasting process begins. The indicator
light of the stop button
of the browning control level
during the toasting process.
Notes
If the power plug is not connected to the wall
7
socket, the start lever
place.
The degree of browning can also be adjusted
7
during the toasting process with the browning
control .
C
5­­ T he appliance automatically switches off as
soon as the set degree of browning has been
reached.
– The start lever
B
stop button light goes off. The toast slices
F
are pushed upwards and can be taken out
of the toaster.
Notes
To cancel the toasting process before it has fin-
7
ished, press the stop button
springs back up and the toast slices can be
B
taken out of the toaster.
After the start lever
7
can use the high-lift function by pushing the
start lever upwards.
B
Caution
Be very careful when taking the toast slices out
7
of the toaster as the metal parts of the toaster
and also the bread can become very hot.
6­­ D isconnect the appliance from the wall
socket.
C
until it automatically
B
and the button
F
illuminates
C
does not snap into
B
springs back up and the
. The start lever
F
springs back up, you
B
Note
is
If toast slices get stuck in the toaster, switch the
7
toaster off immediately by pressing the stop
button . Pull the power plug out of the wall
F
socket. Let the toaster cool down completely.
Carefully try to take the bread out of the toaster
without damaging the sensitive heating ele-
ments and other parts. Do not use any electro-
conductive objects to remove the bread from
the toaster.
Toasting­frozen­bread
1­­
F ollow the steps from 1 to 4 of the "Toasting"
section.
2­­
P ress the defrost button
– The indicator lights of the defrost button
and stop button
ing process begins.
Note
When the defrost button
7
toasting process takes longer than with normal
toasting.
3­­
T he appliance automatically switches off as
soon as the set degree of browning has been
reached.
– The start lever
button
E
off. The toast slices are pushed upwards
and can be taken out of the toaster.
Notes
To cancel the toasting process before it has fin-
7
ished, press the stop button
springs back up and the toast slices can be
B
taken out of the toaster.
After the start lever
7
use high-lift function by pushing the start lever
upwards.
B
Caution
Be very careful when taking the toast slices out
7
of the toaster as the metal parts of the toaster
and also the bread can become very hot.
.
E
illuminate and the toast-
F
is pressed, the
E
springs back up; defrost
B
and the stop button
F
. The start lever
F
springs back up, you can
B
ENGLISH
E
lights go
19