DWT STS04-65 DV Notice Originale page 27

[STS07-100 DV, STS07-120 TV]
• Loosen locking lever 10 (see fig. 15).
• Shift the base plate 14 back and select the need-
ed angle of the casing using the readings of the
scale 11 or the readings of the additional measurement
instrument�
• Tighten locking lever 10�
• Perform sawing as described above�
Power tool maintenance /
preventive measures
Before carrying out any works on the power tool it
must be disconnected from the mains.
Cleaning of the power tool
An indispensable condition for a safe long-term exploi-
tation of the power tool is to keep it clean� Regularly
flush the power tool with compressed air thought the
ventilation slots 2�
After-sales service and application service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
The manufacturer reserves the possibility to introduce changes.
well as spare parts� Information about service centers,
parts diagrams and information about spare parts can
also be found under: www.dwt-pt.com�
• Categorically not to drop any mechanical impact on
the packaging during transport�
• When unloading / loading is not allowed to use any
kind of technology that works on the principle of clamp-
ing packaging�
Recycle raw materials instead of dispos-
ing as waste.
Power tool, accessories and packaging
should be sorted for environment-friendly
recycling�
The plastic components are labelled for categorized
recycling�
These instructions are printed on recycled paper man-
ufactured without chlorine�
English
27
Transportation
of the power tools
Environmental
protection