Publicité
Les langues disponibles
Les langues disponibles
WELDING IN SYNERGIC MODE (DEFAULT WELDING MODE)
Ring
1.5mm
Fe
+1
zone de
message
message
area
To adjust the welding power current (value
To increase or decrease the metal thickness (value
To adjust the other synergic welding settings (material, type and size of electrode, gas), refer to the chapter «Synergic
Settings».
OVERVOLTAGE DEFECT
WELDING IN MANUAL MODE
t
ms
100
0
COM. DEFECT
message
area
To increase or decrease the arc duration (value
Main Menu
To increase or decrease the arc current (value
> Settings
To adjust the other manual welding settings (current and welding steps duration), refer to the chapter «Manual Set-
Manual Mode
OVERHEATING DEFECT
tings».
Configuration
OVERHEATING DEFECT
MAIN MENU
To access the Main Menu from the Synergic or Manual modes, press the button Menu/Validate
Configuration
> Pregas
> 100ms
Main Menu
Postgas
MOTOR DEFECT
PRESSED KEY
Language
Product reset
> Settings
Info
Manual Mode
Configuration
Info
Soft gene
Hard gene
Manual Settings
• « Settings » access the welding settings (synergic or manual)
• « Manual Mode » / « Synergic Mode» change the welding mode on the machine (synergic mode <-> manual mode)
Soft gun
Configuration
• « Configuration » access the advanced settings on the machine (language, gas options, information, etc.)
Hard gun
> Pregas
> 100ms
Postgas
Press the return button
Start-up
> Q = 0
Language
Product reset
Info
SYNERGIC SETTINGS
Synergic Settings
> Material
Manual Settings
Gas
Electrode
THK. elec.
Start-up
> Q = 0
In Synergic Mode, the time and current for the different phases are selected automatically
Gas
t
by the machine.
100
When the machine starts, the Synergic Mode is launched using the settings previously in
2.0
use.
OVERHEATING DEFECT
> Settings
Manual Mode
Configuration
I
In Manual Mode, the time, current and coefficient for the different phases.
A
200
Access the Manual Mode using the Main Menu.
PRESSED KEY
> Pregas
Postgas
Language
Soft gene
t
Product reset
Hard gene
100
Info
Soft gun
Hard gun
Manual Settings
Start-up
500ms
EN
Press the keys G+ and G- to move the section cursor. Select the section by pressing the
Synergic Settings
.
> Material
V0.0
Gas
V0.0
Electrode
THK. elec.
V0.0
V0.0
500ms
to return to the welding screen.
EN
Press the keys G+ and G- to move the left cursor (Material, Gas, Type and thickness of the
electrode). Press the keys D+ and D- to modify the values of each item.
> Fe
:3 sec
Push the Menu/Validate button
ON
to reset
synergic welding screen.
Ring
1.5 mm
Push the return button
M35 - ARC
I
ms
A
200
message
area
), use the keys G+ and G-.
), use the keys D+ and D-.
Main Menu
Configuration
Info
> 100ms
t
I
ms
), use the keys G+ and G-.
A
500ms
100
100
EN
V0.0
I
ms
A
), use the keys D+ and D-.
V0.0
100
zone de
message
V0.0
zone de
V0.0
message
> Q = 0
> Fe
ON
Ring
1.5 mm
Product reset
to ignore the settings and return to the Main Menu.
Main Menu
> Settings
Manual Mode
Configuration
Configuration
> Pregas
> 100ms
Postgas
500ms
Language
EN
Product reset
Info
Manual Settings
Start-up
> Q = 0
Synergic Settings
> Material
> Fe
Gas
ON
Electrode
Ring
THK. elec.
1.5 mm
Product reset
:3 sec
to reset
to confirm the synergy settings and return to the
EN
.
9
Publicité
