Connect The Lamp To A Network - Beurer ML 20 Mode D'emploi

7. Connect the Lamp to a Network

1. Power on the lamp and ensure your mobile device's Wi-Fi
is turned on and connected to your Wi-Fi network.
NOTE: Only 2.4 GHz (b/g/n) networks are compatible;
5 GH networks are not compatible.
2. Tap the "+" symbol on the
top right of your device's
screen and select "Lighting
devices" from the list.
3. Activate Wi-Fi
configuration mode on the lamp by
pressing and holding the Wi-Fi Button
for five seconds; the Wi-Fi Indicator will
flash rapidly, indicating the lamp is ready
to configure.
11