Accessories; Operation Of 24V Dc Navigation Lights With External Power Supply; Disassembly; Information On Electromagnetic Compatibility (Emc) - Glamox Aqua Signal 60 Serie Instructions De Service

11 Accessories

en
de
fr
12 Operation of 24V DC navigation lights with external
power supply

13 Disassembly

14 Information on Electromagnetic Compatibility (EMC)

Assembling of screw-set 8353200200
(4 screws, washers and nuts)
1. Stainless steel screw M8 x 45
2. Stainless steel washer Ø8,4 mm
3. Plastic washer Ø8,5 mm
4. Mounting console min. 8,0 mm
5. Lock washer Ø8,0 mm
6. Stainless steel nut M8
If the navigation lights are operated with 24V DC and external
power supply units are used to generate the 24V DC, it must be
ensured, that the power supply units used, are able to supply an
output current of ≥ 5 A for at least 2 seconds, in addition to the
normal operating current.
To disassemble the navigation light, the housing cover is opened
and the electrical connections are
screws can be released.
The navigation lights are tested in accordance with IEC 60945
and are below the permissible limit values. Nevertheless, it may
be the case that interactions result between navigation lights and
Page 20 of 24
with appropriate support
removed. Then the fastening
9420119300_en Rev. 3