TRIUMPH SPORTS USA 45-6793W Mode D'emploi page 7

FIG.4A
Attach one hook (#43) and one LEFT bracket (#39) to Leg (#5) using Pilot Holes and Screws (#A52).
Repeat the step to attach one hook (#43) and one RIGHT bracket (#57) to Leg (#4) using Pilot Holes
and Screws (#52). These brackets assembly will hold the archery board in place.
Attach the LEFT (#42L) and RIGHT (#42R) Plastic Dart Board Guide Brackets to the End Apron using
two Screws (#A51) as shown. These brackets will hold Dartboard (#8) board.
FIG.4B
To support the Table Tennis table (#2) into the upright position, attach the LEFT bracket (#39) and
RIGHT bracket (#57) to the Legs using Pilot Holes and Screws (#A52). And attach the Hooks (#43)
to the Legs using Pilot Holes and Screws (#A52) as shown in FIG 4B.
At the opposite end of the table, attach one Hook (#43) to the End Apron of table (#1) using Pilot Holes
and Screws (#A52). Attach two hooks (#43) to the End Leg Brace (#59) using Pilot Holes and Screws
(#A49)
42L
Pilot Holes
A51
42R
A52
Open face
this side.
A49
Note: Open
End Up
Pilot Holes
Open
face
this
side.
A52
Pilot Holes
Table Tennis
this side
FIG.4A
Open
face
this
57
side.
A52
Pilot Holes
A52
Pilot Holes
A52
FIG.4B
A52
57