Abicor Binzel EWR PRO/BASIC Mode D'emploi page 32

13 Disposal
13 Disposal
13.1 Materials
13.2 Consumables
13.3 Packaging
EN - 16
6 Remove the shielding gas hose from the gas supply line and the gas
discharge line.
For the disposal observe the local regulations, laws, provisions, standards and
guidelines. For the product to be properly disposed of, it first must be
dismounted.
 See 12 Dismounting on page EN-15
The product housing is made of aluminium. Furthermore, the electronic
components must be sent for recycling as electronic scrap. The plastic materials
used are marked in preparation for sorting and separation of the materials for
later recycling.
Oil, grease and cleaning agents must not contaminate the ground or enter
sewage systems. These materials must be stored, transported and disposed of
in suitable containers. Observe the relevant local regulations and disposal
instructions of the safety data sheets specified by the manufacturer of the
consumables. Contaminated cleaning tools (brushes, rags, etc.) must also be
disposed of in accordance with the information provided by the manufacturer
of the consumables.
ABICOR BINZEL has reduced the packaging for shipping to a minimum.
Packaging materials are always selected with regard to their possible recycling
ability.
EWR RPO/BASIC