Eu Declaration Of Conformity; Responsibilities Of The User - Abicor Binzel EWR PRO/BASIC Mode D'emploi

EWR RPO/BASIC
1 Identification

1.1 EU Declaration of Conformity

Designation
Relevant EC Directives
Harmonized standard applied
Information regarding the EU Declaration of Conformity
Tab. 1

1.2 Responsibilities of the User

The gas monitoring system EWR RPO/BASIC is used in industry and in the
trade for regulating the gas supply in MIG/MAG and TIG inert gas welding.
These operating instructions only describe the gas monitoring system
EWR RPO/BASIC. The gas monitoring system EWR RPO/BASIC may only
be operated using original ABICOR BINZEL spare parts.
according to the EC Directives:
Electromagnetic Compatibility Directive 2004/108/EC.
We,
Alexander Binzel Schweisstechnik GmbH & Co. KG
hereby declare that, on the basis of its design and construction and in the
present version, the product described in these operating instructions complies
with the basic safety and health requirements of the EC directive. Any
modification not agreed with us will void this declaration.
Legal representative of the documentation: Hubert Metzger
Kiesacker 7-9, 35418 Alten-Buseck
Gas monitoring system EWR RPO/BASIC
Electromagnetic Compatibility Directive 2004/108/EC
DIN EN 61000-6-2, EN 61000-6-3
Within the EEA (European Economic Area), the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Labor
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the welding torch and welding unit
comply with the EC EMC Directive (2004/108/EC) and that the signal
utilisation of the integrated welding current monitoring against stray currents is
installed properly.
1 Identification
EN - 3