Publicité
STEP 2B – SOLID CONCRETE INSTALLATION
Use wall plate to mark mounting locations / drill pilot holes
Use la placa de pared para marcar el lugar donde se realizará la instalación
Utilisez la plaque murale pour marquer l'emplacement de montage
LEVEL WALL PLATE
BUBBLE LEVEL AND
MARK HOLES FOR DRILL
BIT PILOT HOLE
Use Wall Plate with level to ensure proper
alignment and mark mounting locations.
Insert Wall Anchors gently into concrete
wall (use hammer if necessary).
Solid Concete
Concreto sólido
Béton massif
Drill pilot holes into solid concrete (x4).
Attach Wall Plate to the wall with Lag Bolts
and Washers using a Socket Wrench
Drill pilot hole
Realice el agujero piloto
Percez le trou de guidage
DRILL BIT NOT INCLUDED
W-B
W-C
W-A
P6
Publicité
