Publicité
Liens rapides
BRKT TLT3260MAX-LVL
BRKT TLT3790MAX-LVL
Max Tilt Single Rail Flat Panel Mount
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MANUEL D' INSTRUCTIONS
!
CAUTION:
THE MAXIMUM LOADING WEIGHT IS 120
LBS FOR MEDIUM MOUNT AND 175LBS FOR LARGE
MOUNT. USE WITH PRODUCTS HEAVIER THAN THE
MAXIMUM WEIGHT INDICATED MAY RESULT IN
INSTABILITY AND POSSIBLE PERSONAL INJURY.
Max Screen Size: 60"(M) / 90"(L)
V3
V1
P1
Publicité
Manuels Connexes pour BRKT Brand BRKT TLT3260MAX-LVL
Sommaire des Matières pour BRKT Brand BRKT TLT3260MAX-LVL
- Page 1 BRKT TLT3260MAX-LVL BRKT TLT3790MAX-LVL Max Tilt Single Rail Flat Panel Mount INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES MANUEL D’ INSTRUCTIONS CAUTION: THE MAXIMUM LOADING WEIGHT IS 120 LBS FOR MEDIUM MOUNT AND 175LBS FOR LARGE MOUNT. USE WITH PRODUCTS HEAVIER THAN THE MAXIMUM WEIGHT INDICATED MAY RESULT IN INSTABILITY AND POSSIBLE PERSONAL INJURY.
- Page 2 Tampoco prevé todas las posibles contingencias relacionadas con la instalación o el uso de este producto. La inf ormación que contiene este documento queda sujeta a cambio sin aviso previo o compromiso alguno. BRKT BRAND no ofrece ninguna garantía, ni expresa ni implícita, respecto de la información aquí incluida. BRKT BRAND no se responsabiliza de la precisión de la información provista en este documento, ni tampoco de que sea completa o suficiente.
- Page 3 HARDWARE PRODUCT NUMBERS M4 x 30 M6 x 30 M8 x 30 M6 x 15 M8 x 15 M4 x 12 M8 x 45 LAG BOLT WALL SQUARE LAG BOLT 10mm STEEL 8mm x 65mm ANCHOR WASHER SPACER STEEL WASHER SPACER WASHER PRODUCT COMPONENT PARTS...
- Page 4 STEP 1A - FLAT BACK FLAT PANEL (VERTICAL RAILS) Connect Vertical Rails to flat panel Conecte el adaptador al monitor Connectez l'adaptateur au moniteur STEP 1B - CURVED BACK FLAT PANEL (VERTICAL RAILS) Connect Vertical Rails to flat panel Conecte el adaptador al monitor Connectez l'adaptateur au moniteur Spacers can also be used to provide clearance for cables...
- Page 5 STEP 1- USE M8 STEEL WASHER IF THE PHILLIPS SCREWS FROM THE MONITOR KIT ARE TOO LONG Diagrams show three options for using additional washers if hardware screws are too long to properly tighten into back of flat panel television. select the proper spacers or spacer suit as below if necessary...
- Page 6 STEP 2- WOOD STUD INSTALLATION (CONCRETE INSTALLATION SKIP TO STEP 3) STEP 2- CENTER UNIVERSAL MONITOR PLATE Find stud and mark edge and center locations Ubique el panel y marque las ubicaciones de los bordes y el centro. Repérez l'emplacement d'une poutre, puis marquez l'emplacement des bords et du centre de cette poutre. ”) 70mm STEP 2A &...
- Page 7 STEP 2C- MOUNT WALL PLATE TO WALL Mount wall plate 16” STUD (Medium Tilt Mount) Coloque la placa de pared 16” or 24” STUD (Large Tilt Mount) Montez la plaque murale STEP 3A & 3B- SOLID CONCRETE INSTALLATION Use wall plate to mark mounting locations/ drill pilot holes Use la placa de pared para marcar el lugar donde se realizará...
- Page 8 STEP 3A & B – POSITION WALL PLATE, MARK, & DRILL PILOT HOLES Position wall plate to desired location, level, and Drill 4 pilot holes mark pilot locations with pencil. STEP 3C- SOLID CONCRETE INSTALLATION. Mount wall plate Coloque la placa de pared Montez la plaque murale Concrete Wall Concrete Wall...
- Page 9 STEP 4A- ATTACH PANELTO WALL PLATE & ADJUST TILT ANGLE Hang vertical rails with monitor attached Cuelgue con el monitor adherido. Accrochez avec le moniteur installé. Flat Panel Vertical Rails Pull spring Wall lock cord Plate down and gently push bottom of panel to wall and...
- Page 10 STEP 4B- ADDITIONAL SECURITY FEATURE (OPTIONAL) Option Opcione Option Vertical Rails Flat Panel Wall Plate Vertical Rails have 7mm hole located at the bottom for placement of pad lock for additional theft) security (pad lock not included) STEP 4C- ADDITIONAL FEATURE (OPTIONAL) Attach the hook and loop at the desired location of the TV bottom Peel off the back...
- Page 11 STEP 4C- ADDITIONAL FEATURE (OPTIONAL) knead and hold the control of the strap then adjust the length Push Push STEP 4D- ADJUST THE SCREWS ON THE VERTICAILS TO LEVEL THE FLAT PANEL rising up max 0.5”...
- Page 12 This warranty applies to US Residents who purchase from an authorized BRKT BRAND Dealer. BRKT BRAND are covered againse defects in materials and workmanship for 5 years. BRKT BRAND will repair or replace the defective component or product, at its sole discretion. Failure to follow product care instructions from BRKT BRAND will result in void of warranty.