BRKT Brand POWR RACK11 Manuel D'instructions

POWR RACK11
Rack Mounted Power Conditioner
Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. All the safety and operating instructions should be read before the product is operated.
2. Keep these instructions. The safety and operating instructions should be retained for future reference.
3. Heed all warnings. All warnings on the product and in the operating instructions should be adhered to.
4. Follow all instructions. All operating and use instructions should be followed.
5. Do not use this apparatus near water. Do not use the product near water and moisture, for example: near a bathtub, washbowl,
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool.
6. Clean only with a dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a dry cloth for cleaning.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that product
heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is required when the a pparatus has been damaged in any way, such as
power-supply cord or plug is d amaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
INSTALLATION
Attach the POWR RACK11 to any 19-inch rack using rack rail screws (not included).
SPECIFICATIONS
19-inch rack mount surge protector
•
Digital amperage/voltage meter
•
Pull out dimmable LED lights
•
11 (10 rear, 1 front) NEMA-15R receptacles
•
On/off switch with built-in circuit breaker
•
LED Indicators - Power, Protected, Grounded
•
Current capacity 12A
•
Maximum output power 1,500W
•
Line voltage 125V AC 60Hz
•
POWR R ACK11 I M v 1
Peak impulse current 120,000A
•
Transient response time <1 nanosecond
•
Energy dissipation 3,000 Joules
•
EMI/RFI noise filtration 40 dB
•
Noise filtration level 100kHz – 1MHz
•
9-foot heavy-duty power cord
•
Dimensions 19.0" x 4.5" x 1.75"
•
Weight 5.25 pounds
•
UL, cUL listed (UL60950-1, UL1449)
•
1