4. OPERATION INSTRUCTIONS
4.1. BEFORE WASHING
Sort the linen according on the temperature and the instructions of the manufacturer of the fabrics. Check
if there aren't any strange objects between the linen like nails, screws, needles, etc. in order not to damage
the washer-extractor or the linen. Turn sleeves of shirts, blouses, etc. inside out. To get a better washing
result, you have to unfold the fabrics and mix the bigger and smaller pieces of fabrics.
4.2. OPEN THE DOOR
Open the door by pulling on the door handle.
4.3. LOADING THE WASHER
Put the linen in the drum depending on the maximum capacity of the washer. Do not overload the washer extractor.
Overloading the machine can lead to a bad wash result. Half washing loads can obstruct a proper function.
4.4. CLOSE THE DOOR
Close the door with the door handle, making sure the door is properly latched before operating the washer.
4.5. PROGRAM SELECTIONS
Choose one of the available wash programs, best corresponding to the quality of the garments and allowed
wash temperature in the wash load. Insert the wash program number. The different washing programs are
indicated on the operator panel. The selection of the program determines the temperature and the time for
washing and rinsing, the wash action and the spin speed and time. If you wish, you can adapt the wash
programs. (See programming manual)
4.6. ADD DETERGENTS
Washer extractors with top soap dispenser.
Fill the soap dispenser on the top of the washer extractor depending of the chosen program.
Dispenser A : Prewash (add the detergent at the beginning of the wash cycle)
Dispenser B : Wash (add powder detergent or bleach detergent at the beginning
of the cycle, you may add liquid detergent or liquid bleach during the wash cycle.
If added at the start of the cycle, it will run in the washer prematurely)
101008
Dispenser C : Final Rinse (Add fabric softener at the beginning of the cycle or before
the final rinse)
100 246
PUBLICATION DATE 04/05
USER´S MANUAL
11