Electrical Connections To The Station - AddEnergie SmartDC-V2 Guide D'installation

Table des Matières

Publicité

Branchement de la borne

Electrical connections to the station

A
B
C
1 . Brancher les 3 conducteurs sur le bornier triphasé d'alimentation .
2 . Brancher le NEUTRE sur le bornier de neutre .
3 . Brancher la MALT sur le bornier de la mise à la terre .
REMARQUE : Les connecteurs sont compatibles avec les fils de cuivre et d'aluminium .
1 . Connect the three conductors into the three-phase power terminal .
2 . Connect the NEUTRAL conductor into the neutral terminal .
3 . Connect the GROUND into the grounding terminal .
NOTE: Connectors are compatible with copper and aluminum wire .
© 2019 ADDÉNERGIE TECHNOLOGIES INC. TOUS DROITS RÉSERVÉS Les informations et les spécifications contenues dans ce document sont sujettes aux changements, modifications et ajouts à n'importe quel moment et sans préavis.
© 2019 ADDÉNERGIE TECHNOLOGIES INC. ALL RIGHTS RESERVED Information and specifications contained in this document are subject to change, amendments and additions at any time, without notice.
15

Publicité

Table des Matières
loading

Table des Matières