F.F. Group P 720 PLUS Notice Originale page 8

8 | English
TROUBLESHOOTING GUIDE
The planer won't start.
Poor performance.
The planer is overheated.
The planer switches on
but the drum doesn't
rotate.
MAINTENANCE
Regular inspection and cleaning reduces the neces-
sity for maintenance operations and will keep your
tool in good working condition. The motor must be
correctly ventilated during tool operation. For this
reason avoid blocking the air inlets.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste. Machine, accessories and pack-
aging should be sorted for environment -
friendly recycling. The plastic components
are labeled for categorized recycling.
EXPLANATION OF SYMBOLS
Double insulation
For indoor use only. Do not expose to
rain.
Wear eye protection.
Damage to lungs if an effective dust mask
is not worn.
Wear protective gloves
Damage to hearing if effective hearing
protection is not worn.
• Make sure that
the mains lead is
undamaged and
properly connected
to the wall socket.
• Check that the wall
socket is live.
• Refer to the Chang-
ing blades section
above.
• Check that the
holes in the motor
housing ventilation
(2) are free from
debris.
• The drive belt is
defective. Refer to
the Changing the
drive belt section
above.
To reduce the risk of injury, the user must
read and understand this manual before
using this product.
Important!
Conforms to relevant safety standards
GUARANTEE
This product is warranted in accordance with the le-
gal/country specific regulations, effective from the
date of purchase by the first user. Damage attribut-
able to normal wear and tear, overload or improper
handling will be excluded from the guarantee. In
case of a claim, please send the machine, completely
assembled, to your dealer or the service Centre for
electric power tools.
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
ƒ
product is in conformity with the following stan-
dards or standardized documents: EN 60745-1, EN
60745-2-14 in accordance with the provisions of the
directives 2006/42/EC.
Technical File at:
ƒ
FF GROUP TOOL INDUSTRIES S.A.,
19300, Aspropyrgos - Greece
Loudovikos Tsirigiotis
Operations & Engineering
FF GROUP TOOL INDUSTRIES S.A., 19300
Aspropyrgos - Greece. 19/01/2018
P 720 PLUS