F.F. Group CBC 242C PLUS Notice Originale page 9

CBC 242C PLUS - CBC 252C PLUS
Actions
Clean the outside area of the machine.
Check the harness for damages.
Make sure the correct operation of the throttle
and the throttle trigger lock.
Make sure that the handles and handle bar are
not damaged and secured.
Check the correct operation of the stop switch.
Check that the cutting equipment does not
rotate at the idle speed of the engine.
Check and clean the air filter as mentioned
above and replace it if needed.
Check the cutting equipment guard for damages
and replace it if needed.
Check the cutting equipment for cracks and
other damages. Replace if needed.
Check the locking nut of the cutting equipment
that is tightened appropriately.
Check for fuel leaks from the engine, fuel tank
and fuel lines.
Check the starter and starter cord for damages
and operation.
Check the electrode gap of the spark plug and
clean it.
Clean the outside area of the carburetor.
Check the quantity of grease in the bevel gear,
to be three quarters. Refill if needed.
Check the fuel lines for cracks and the fuel filter
for dirt deposits. Replace if needed.
Replace the spark plug.
Check the cables and lose connectors.
MAINTENANCE SCHEDULE
Daily
X
X
X
X
X
X
X
X
X
X
X
English |
Weekly Monthly
X
X
X
X
X
X
X
www.ffgroup-tools.com
9